xgggfx 0 Posted July 9, 2020 Share Posted July 9, 2020 Description: So currently, the police battering ram can turn any prop into an open fading door and just walk right through any prop. I think this is just a little bit overpowered, and I believe that battering rams should only be able to open doors & fading doors. Reasoning: (I know this is DarkRP so it doesn't really focus on realism, but still hear me out). In real life, a police battering ram can be used for 1 thing, which is to open locked doors. I believe this should be replicated as best as possible, otherwise the police are kind of over powered. If I build a wall to block off an alternate entrance to my base, (still allowing for one entrance to enter through), the police shouldn't just be able to bypass my entire base and enter through a blocked off entrance. I can prevent this by stacking my props that block off the entrance, but then I lose valuable props that I could use to further improve my base. Thank you for taking the time to read my suggestion, I hope you will take into consideration my reasoning behind this and I hope to see this nerf on the server! :) Link to comment
IAreGunner 269 Posted July 9, 2020 Share Posted July 9, 2020 -1 just no, it's not op at all . It's called make it not see through able. 1 2 Link to comment
xgggfx 0 Posted July 9, 2020 Topic Author Share Posted July 9, 2020 39 minutes ago, OpTic Gunner said: -1 just no, it's not op at all . It's called make it not see through able. its not op that they can battering ram literally any prop at all and make it disappear for a few seconds? that they can enter through back entrances of a base that no other class can get into? Link to comment
Theta2 418 Posted July 9, 2020 Share Posted July 9, 2020 The only props that become invisible are doors that are already faded. If it hits a non faded prop it will just become unfrozen Link to comment
xgggfx 0 Posted July 10, 2020 Topic Author Share Posted July 10, 2020 4 hours ago, Theta2 said: The only props that become invisible are doors that are already faded. If it hits a non faded prop it will just become unfrozen Huh. I setup a base where my printers were visible, and I only had one layer on the window, and the police officer used his battering ram and the prop disappeared for a few seconds. It was not a fading door. To prevent this i had to stack the window with like 10 props. Link to comment
MeLikeFood 39 Posted July 10, 2020 Share Posted July 10, 2020 im gonna +1 this not because i think what your saying should be done but i think at least maybe it should turn a frozen prop into an open fading door for like 20 seconds so if a cop false warrants someone building they dont loose thier base 1 Link to comment
xFish 394 Posted July 10, 2020 Share Posted July 10, 2020 I'm going to +1 this as well, I had a similar case as @xgggfx and almost lost all my printers at the time. I'd rather not have to layer my base weld it all, just for it to go bye bye when someone gravity guns it and walks through 1 Link to comment
MINE20 6 Posted July 10, 2020 Share Posted July 10, 2020 In RP it is waaaay too op. The only reason I like the battering ram is in case of a rare situation when someone (cough cough diego) goes afk with propblock and I can use it to unfreeze and move the prop. During rp trying to defend a base from police with a simple prop blocking an entrance can make it really hard to even impossible. Police are basically deleting your base when they do that. +1 1 Link to comment
IAreGunner 269 Posted July 12, 2020 Share Posted July 12, 2020 There's honestly such an easy way to prevent this honestly. 1. The material you guys use depends on if they could see through. Just use a material that isn't see-throughable. 2. Don't straight up put your printers down fast make sure that no one can see in your base and then put them down. 3. Other than that I got nothing else to say but if you lose money just use delivery man, delivery man can get you a lot of money in an hour. -1 This is just a pointless suggestion, And yeah I understand there are a minge cops But I still think this is one of the most pointless suggestions I ever saw. Link to comment
Lancey Armstrong 31 Posted July 12, 2020 Share Posted July 12, 2020 -1 You should not have to nerf the battering ram just because you guys want to show off your printers. If you dont want to be raided by the cops dont have a see through prop blatantly showing ur printers. Link to comment
Skeletron 34 Posted July 13, 2020 Share Posted July 13, 2020 -1 9/10 times police won't have evidence of printers unless you're blatantly showing them off to get raided like lancey said. Everyone's trying to defund the police these days lol 1 Link to comment
ToxinsLivid 21 Posted July 13, 2020 Share Posted July 13, 2020 False warrant is special because the police are REQUIRED to have proof if asked. This is the only case where innocent until proven guilty doesnt apply and is reflected in the rules. If you do not give them a reason to raid then there should be no reason for the ram to change. Tips: 1way props exist to help builders and in this case works the best. Hide printers not in the main room where your fade doors are to prevent anyone from just walking in and seeing them. Be careful who you let in the party or base. have an airlock on your fast doors with a toggled button to kill anyone who does in before they get in the base. Hope these helped. Link to comment
Guest proggy Posted July 17, 2020 Share Posted July 17, 2020 Denied We don't really have any plans to nerf the battering ram as of now. With some good building, police shouldn't be able to 'legally' warrant your base. Make sure they can't see your printers/drugs. Link to comment
Recommended Posts